Making wood pallets
Written by Keenan
I'm always looking for Dio props. And I found that a simple paint stick/stirrer can be transformed into a wood pallet. It's really very simple, and in this case free.
Using a utility knife and a straight edge cut the paint sticks up to the desired size (Mine were about 3" by 3/8").
I used 4 section for the base. 3 for the center. The tops varied from 4-6 depending on look.
I used wood glue to hold everything together
I then used a 1/32" bit to dimple the top of the pallet, so it looks like nails.
For weathering I painted different washes so some of them look dirty. I even used some left over putty to give one that "What is that on the pallet" look. Others I left clean- for that new pallet look.
I dremeled the front and rear openings more, and gave it a worn look.
In the end they make for a great Dio props (I've got 25 now).